The product lines we carry are extremely cost effective, significantly improve the energy efficiency and noise control of homes, large buildings and commercial structures and are designed to improve the comfort of occupants as well as “ease of use” by construction and renovation specialists.

Radiant which includes Hydronic “In-Floor” Radiant Heat & Snowmelt Systems provide warm, energy-efficient floors and snow-free driveway surfaces. There are many positives but energy efficiency and increasing the value of your home are the two that usually make the difference.

Amvic’s combination of molding expanded polystyrene (EPS) insulation, one of the highest performing energy efficient insulation materials available today, with a High Impact Polystyrene (HIPS) film, makes for a strong and resilient Ampex panel. The panel combines rigid insulation, a vapor barrier and PEX tubing locking mechanism into a single solution that significantly reduces installation time.

R10 to R16   /   30 PSI   /   2’x4’

BOW’s OXYPERT™ tubing is designed specifically for hydronic heating and hydronic radiant closed loop heating applications. OXYPERT™ tubing can also be used in snow melting applications. This tubing has an oxygen outer barrier liner which makes it ideal for hydronic and radiant floor heating applications. The function of the outer liner is to limit the oxygen permeation rate through the tubing wall in accordance with DIN 4726 which helps protect ferrous elements in the system from corrosion.

OXYPERT™ tubing is made to CTS (Copper Tube Size) outside dimensions and an SDR (Standard Dimension Ratio) of 9 and is available in nominal sizes 1/2″ and 3/4″. It is available in coils up to 1,000 feet which are foot marked. OXYPERT™ tubing is not rated for potable water distribution.

Isolofoam’s Isorad V2 Rigid Radiant Heating Floor Insulation Panels combine the insulation performance of an expanded polystyrene board with a multidirectional tube-retention system, ISORAD V2 provides the perfect solution for under slab insulation when embedding a radiant heating system in concrete. It can also be used for terrace and exterior slabs/ sidewalks/ parking lots to accelerate melting of ice and snow.

 

ISORAD V2 160: R10.1 or R15.1   /   16 PSI   /   2’x4’ or 4’x4’

ISORAD V2 250: R10.5 or R15.7   /   25 PSI   /   2’x4’ or 4’x4’

ISORAD V2 300: R10.6 or R15.9   /   30 PSI   /   2’x4’ or 4’x4’

Nudura HYDROFOAM Radiant Heat Insulation Panels are a molded insulation board with a multi-directional anchoring design for radiant heat systems. It is a 2-in1 product designed to insulate under concrete slabs and offers efficient installation of radiant heat tubing. It is overlapped and interlocked on all four sides, allowing for faster installation times and a secure fit.

 

Hydrofoam NUS-F0RHF-25: R10.0   /   23 PSI   /   4’x 4’

Hydrofoam NUS-F0RHF-40: R16.0   /   23 PSI   /   4’ x 4’

The SR.HydroPex panels manufactured by StyroRail are hydronic radiant heat flooring insulation panels made of expanded polystyrene [EPS] rigid insulation.

SR.Hydropex panels serve as an insulating material that offers support to fix water or glycol radiant heat floor pipes. Install 200 series prior to the pouring of finished concrete of basement slabs and residential garages; 300 to 600 series for commercial, industrial and agricultural concrete slabs.

SR.Hydropex 200: R10.0   /   16 PSI   /   4’ x 8’

SR.Hydropex 350: R10.8   /   30 PSI   /   4’ x 8’

SR.Hydropex 600: R11.5   /   60 PSI   /   4’ x 8’

RadiantPERT is 5-layer tubing used for radiant heating, cooling, snow melting, and distribution piping. RadiantPERT offers high strength, high temperature resistance, and long life without cross-linking. It is the strongest flexible pipe on the market today when compared to alternative materials. RadiantPERT offers the greatest range of fitting flexibility as it can be used with ASTM F1960 Cold Expansion, CinchClamps, CrimpRings, and Compression fittings.

RadiantPERT is manufactured with a DIN Standard barrier that makes it easier to pull through joists, reduces expansion noise, protects the oxygen barrier against moisture and job-site abuse. It is certified to ASTM F2623 for PE-RT SDR Tubing and carries a 30-year warranty for residential and commercial heating and snow melting applications.

Accessories:

Acoustic Sealant for Polyethylene Vapour Barriers (850 ml tubes)
Blue Sheathing Tape for PE Vapour Barrier
Polyethylene Vapour Barriers (6 mil – 8’, 9’ or 10’ x 1500 sq. ft. rolls)

Who we are …

The RGS Team are “Subject Matter Experts” in High Performance Building Products & Systems for Residential, Multi Unit Residential & Commercial structures.

 

What we do …

Provide our customers with the materials and expertise to design and build Better Buildings. Buildings that are sustainably built with products that are recyclable, sourced locally and contribute significantly to reduced energy costs and the lowering of our Carbon Footprint.

 

How we do it …

We are your “Net Zero” ally, committed to using our technical expertise to investigate the products we offer so that you don’t have to:
• Embodied Carbon Content
• Environmental Product Declaration
• Global Warming Potential
• Life Cycle Assessments

 

Our Goal …

To provide high performance products with the in-house expertise to ensure that you always have the right material for the right application, foundation to roofline, cradle to grave. Products designed to reduce the environmental/carbon footprint to ensure a sustainable future.

To educate and communicate the environmental performance and impact of these materials over their lifetime we will work with our vendors to ensure the products we represent meet these criteria, with the building science to back it up.