SilveRboard is a rigid, flat-sheet insulation material made from Expanded Polystyrene (EPS), covered with a layer of polypropylene reflective lamination on both sides. When installed with an air gap between SilveRboard® and the exterior cladding, the film is able to reflect radiant energy away from the surface keeping heat out during the summer and keeping heat in during the winter.
SB25 (HD – Type 3): R4.35 per inch
25 PSI | 4’x8′ or 4’x10′
SB35 (HD – Type 3): R5.0 per inch
35 PSI | 4’x8′ or 4’x10′
SB40 (HD – Type 3): R5.0 per inch
40 PSI | 4’x8′ or 4’x10′
StyroRail’s SR.P products are versatile expanded polystyrene insulation panels used to insulate all surfaces from the foundation to the roof. Insulate the interior or exterior surface of foundation walls, the interior or exterior of framed walls as well as underneath the basement and garage concrete slabs.
Versatile Insulation Panels
Expanded polystyrene insulation panel with integrated furring strips at 406 mm [16″] c/c to continuously insulate several surfaces. Ideal where space is limited.
SR.P200 (Type 2): R4.0 per inch
16 PSI | 2’x8’ or 4’x8’
SR.P300 (Type 3): R4.2 per inch
20 PSI | 2’x8’ or 4’x8’
SR.P350 (Type 3): R4.3 per inch
30 PSI | 2’x8’ or 4’x8’
SR.I 100 (Type 1): R3.7 per inch
10 PSI | 4’x8’
* with embedded furring strips
SR.I 200 (Type 2): R4.0 per inch
16 PSI | 4’x8’
* with embedded furring strips
HydroGap® Drainable Housewrap is the best performing drainable housewrap on the market. This product allows construction professionals to Build Better™ by effectively eliminating excess moisture, thereby preventing the damaging effects of mold and rot. Its patent-pending one millimeter spacers allow at least 100X more bulk water to drain from a wall versus standard housewraps.
CLIMA CONTROL
80
MEMBRANE WITH VARIABLE VAPOUR DIFFUSION
CLIMA CONTROL
NET 145
MEMBRANE WITH VARIABLE VAPOUR DIFFUSION AND REINFORCEMENT GRID
CLIMA CONTROL
NET 160
MEMBRANE WITH VARIABLE VAPOUR DIFFUSION AND REINFORCEMENT GRID
VAPOR IN
120
VAPOUR CONTROL MEMBRANE
VAPOR IN
NET 140
VAPOUR CONTROL MEMBRANE WITH REINFORCEMENT GRID
VAPOR IN GREEN
200
VAPOUR CONTROL MEMBRANE BASED ON NATURAL CELLULOSE
Self-adhesive vapour permeable and air barrier membrane with a tri-laminated polypropylene facer used on walls. It can also be used as a through-wall flashing membrane and transition membrane.
RESISTO’s All-Weather Butyl Flashing Tape is a self-adhesive membrane made of rubberized butyl that blocks air and water infiltration. It is easy to apply to wood, aluminum, polyethylene and PVC surfaces, as well as on air barrier membranes and exterior fibreglass gypsum.
RESISTO’s Red Zone Corner Guard is designed to cover and protect the junction between the sill and the jamb, one of the most critical areas.
Accessories:
-
Acoustic Sealant for Polyethylene Vapour Barriers (850 ml tubes)
-
Sealants, Foams & Liquid Membranes
-
Special Tapes