The product lines we carry are extremely cost effective, significantly improve the energy efficiency and noise control of homes, large buildings and commercial structures and are designed to improve the comfort of occupants as well as “ease of use” by construction and renovation specialists.

Rigid Insulation provides thermal protection and can often serve as an air and moisture barrier. It is very effective at resisting heat flow thus saving energy/money. There are two main types of rigid insulation: expanded polystyrene (EPS) and extruded polystyrene (XPS).

SilveRboard is a rigid insulation board made from Expanded Polystyrene (EPS) covered with a layer of polypropylene reflective lamination on both sides. This highly effective combination of materials offers high compressive strength and great thermal performance when used in below grade and under slab applications.

 

EVXD Exterior Insulated Drain Board is a two-in-one rigid Expanded Polystyrene (EPS) insulation board that has integrated drainage channels and is suitable for use on basement foundation walls in both internal and external applications.

With vertical channels every 2” on centre, these panels allow moisture to drain towards the bottom of the wall where it can be dealt with by a properly installed drainage tile system. It also helps your project meet the Government of Ontario’s SB-12 requirement for Continuous Insulation (ci).

R-Value:
R4.0 per inch   /   16 – 30 PSI   /   4′ x 8′

SOPRA-XPS rigid thermal insulation board is made of extruded polystyrene and is composed of closed cell foam. It can be used as thermal insulation for residential applications on exterior foundation walls and under concrete slabs.

SOPRA-XPS:  20 to 100 R5.0 per inch
20 – 100 PSI     /     2’x8’ or 4’x8’

Styrorail’s SR.P products are versatile expanded polystyrene insulation panels used to insulate all surfaces from the foundation to the roof. Insulate the interior or exterior surface of foundation walls, the interior or exterior of framed walls as well as underneath the basement and garage concrete slabs.

Versatile Insulation Panel – Expanded polystyrene insulation panel with integrated furring strips at 406 mm [16″] c/c to continuously insulate several surfaces. Ideal where space is limited.

SR.P200 (Type 2): R4.0 per inch
16 PSI     /     2’x8’ or 4’x8’

SR.P300 (Type 3): R4.2 per inch
20 PSI     /     2’x8’ or 4’x8’

SR.P350 (Type 3): R4.3 per inch
30 PSI     /     2’x8’ or 4’x8’

Accessories:

Acoustic Sealant for Polyethylene Vapour Barriers (850 ml tubes)
Blue Sheathing Tape for PE Vapour Barrier
Polyethylene Vapour Barriers (6 mil – 8’, 9’ or 10’ x 1500 sq. ft. rolls)

Who we are …

The RGS Team are “Subject Matter Experts” in High Performance Building Products & Systems for Residential, Multi Unit Residential & Commercial structures.

 

What we do …

Provide our customers with the materials and expertise to design and build Better Buildings. Buildings that are sustainably built with products that are recyclable, sourced locally and contribute significantly to reduced energy costs and the lowering of our Carbon Footprint.

 

How we do it …

We are your “Net Zero” ally, committed to using our technical expertise to investigate the products we offer so that you don’t have to:
• Embodied Carbon Content
• Environmental Product Declaration
• Global Warming Potential
• Life Cycle Assessments

 

Our Goal …

To provide high performance products with the in-house expertise to ensure that you always have the right material for the right application, foundation to roofline, cradle to grave. Products designed to reduce the environmental/carbon footprint to ensure a sustainable future.

To educate and communicate the environmental performance and impact of these materials over their lifetime we will work with our vendors to ensure the products we represent meet these criteria, with the building science to back it up.